Manual De Usuario Canon Mando A Distancia Rc-V100 [15/26 Páginas]

Canon mando a distancia RC-V100

24 PRESET (preset white balance) button

Changes the white balance to the preset white balance or color temperature setting

that was selected on the camera.

While a preset white balance or the color temperature setting is selected, the button

will light up in orange.

• To fine-tune a preset white balance setting or set the color temperature

1. While the PRESET button is lit up in orange, press the Å button.

The button will light up in red.

2. Fine-tune the preset settings (-9 to +9) or set the desired color temperature with

the Up/Down buttons (navigation buttons).

3. Press the Å button again to set the selected value.

The Å button’s light will go out.

25 WHITE BALANCE R (R gain) dial

26 WHITE BALANCE B (B gain) dial

These dials adjust, respectively, the R gain and B gain of the white balance settings.

By default, the operating mode of the dials is set to relative mode (A 19). You can

change the direction in which you need to turn each dial and its sensitivity to your

preference (A 19).

NOTES

• Only one of the four buttons AWB, A, B and PRESET can be selected at the same time.

27 MASTER BLACK R dial

28 MASTER BLACK B dial

These dials adjust, respectively, the red and blue settings of the master black.

By default, the operating mode of the dials is set to relative mode (A 19). You can

change the direction in which you need to turn each dial and its sensitivity to your

preference (A 19).

Zoom and focus controls

29 FOCUS/ZOOM ACTIVE indicator

This indicator lights up in green when the key lock mode has been set so only the

zoom and focus controls of the remote controller are active.

NOTES

• Immediately after selecting the Only zoom/focus controls active mode, this indicator

may flash momentarily. During that time, the controls cannot be used; please wait

until the indicator lights up permanently to use the remote controller.