Manual De Usuario Acer Tarjeta De Red Acceleraid 170 [41/86 Páginas]

Acer Tarjeta de red AcceleRAID 170

Manual No. 775064 B-1

Appendix B

AcceleRAID 170

Error Messages

☛ Note

The firmware you are using may have these messages

turned off. However, they are listed here for your

reference.

Start-up Error Messages

The BIOS looks for any initialization message posted by the firmware during

the start-up sequence. If a message is found, one of the following errors

displays on screen and the installation process aborts.

AcceleRAID 170 fatal error--Memory test failed!

AcceleRAID 170 fatal error--Command interface test failed!

AcceleRAID 170 hardware error--Run Diagnostics to pinpoint

error

AcceleRAID 170 firmware checksum error--Reload firmware

Drive Check Error Messages

If the firmware finds a valid controller configuration, but it doesn't match the

SCSI drives currently installed, one or more of the following messages

display. Then, the BIOS prints out the following:

AcceleRAID 170 Configuration Checksum error--Run

configuration utility!

If the firmware detects that during the last power cycle the system was turned

off abruptly leaving some incomplete write operations, the following

message appears:

Recovery from mirror race in progress

WARNING: Dead SCSI devices (Channel Target) : x:y

The following messages may also appear:

AcceleRAID 170 cannot recover from Mirror Race!

Some system drives are inconsistent!

manualsocean.com.co

Información

Acer Tarjeta de red Altos R520

Acer Tarjeta de red ALN-201

Acer Tarjeta de red 08P4100

Acer Tarjeta de red AcceleRAID 352

Acer Tarjeta de red WT 300

Acer Tarjeta de red R500

Acer Tarjeta de red Series 520

Acer Tarjeta de red G301

Acer Tarjeta de red IEEE 802.11b Wireless USB Adapter

Acer Tarjeta de red DAC960PG

Acer Tarjeta de red R300

Acer Tarjeta de red ISDN P10

Acer Tarjeta de red Modemconte

Acer Tarjeta de red IEEE 802.11b WLAN PC Card

Acer Tarjeta de red DAC960PJ

manualsocean.com.co

Información